304 plât rholio dur di-staen a ddefnyddir yn helaeth mewn adeiladu, llawdriniaeth, hanfodion cegin, ac ati.

Disgrifiad Byr:

Manylion Cynnyrch

Tagiau Cynnyrch

Disgrifiad o'r Cynnyrch:

Coil dur di-staenyn cael ei ddefnyddio'n eang mewn adeiladu, llawdriniaeth, hanfodion cegin, ac ati Mae 304 o ddur di-staen yn addas ar gyfer adeiladu banisters allanol a chanllawiau, ac mae ganddo berfformiad prosesu da a weldadwyedd.Mae 316 o ddur di-staen yn addas ar gyfer hanfodion cegin fel offer, cyllyll a ffyrc a llestri coginio, ac mae ganddo ymwrthedd cyrydiad da ac ystod eang o siapiau.Mae dur di-staen 316L yn addas ar gyfer cymwysiadau meddygol a llawfeddygol, sy'n gofyn am lefelau uchel o berfformiad dibynadwy.

Enw Cynnyrch	Coil / Strip Dur Di-staen
Technoleg	Rholio oer, rholio poeth
Gradd	200/300/400/900 Cyfres.etc
	Dur di-staen austenitig	Cyfres 200: 201, 202
	Dur di-staen austenitig	Cyfres 300: 304, 304L, 309S, 310S, 316, 316L, 316Ti, 317L, 321, 347
	Dur di-staen ferritig	409L, 430, 436, 439, 441, 444, 446
	Dur di-staen martensitig	410, 410S, 416, 420J1, 420J2, 431,440,17-4PH
	Deublyg a Di-staen Arbennig:	S31803, S32205, S32750, 630, 904L
Safonol	ISO, JIS, ASTM, AS, EN, GB, DIN, JIS ac ati
wyneb	N0.1, N0.4, 2D, 2B, HL, BA, 6K, 8K, ac ati
Amser dosbarthu	3-15 diwrnod yn amodol ar ofyniad a maint y cleientiaid
Pecyn	gofyniad cleientiaid a phacio teilwng i'r môr allforio safonol
MOQ	1 tunnell

Ystod Maint Ar Gael

Dimensiwn	Amrediad
Trwch	Wedi'i rolio'n oer: 0.1 ~ 6mm Rholio poeth: 3 ~ 12mm
Lled	Rolio oer: 50 ~ 1500mm Rholio poeth: 20 ~ 2000mm neu gais cwsmer
Hyd	Coil neu fel cais cwsmer

Arwynebau cyffredin

arwynebau

Priodweddau Cemegol a Ddefnyddir yn Aml :

UNS	ASTM	EN	JIS	C%	Mn%	P%	S%	Si%	Cr%	Ni%	Mo%
S20100	201	1.4372	SUS201	≤0.15	5.5-7.5	≤0.06	≤0.03	≤1.00	16.0-18.0	3.5-5.5	-
S20200	202	1.4373	SUS202	≤0.15	7.5-10.0	≤0.06	≤0.03	≤1.00	17.0-19.0	4.0-6.0	-
S30100	301	1.4319	SUS301	≤0.15	≤2.00	≤0.045	≤0.03	≤1.00	16.0-18.0	6.0-8.0	-
S30400	304	1. 4301	SUS304	≤0.08	≤2.00	≤0.045	≤0.03	≤0.75	18.0-20.0	8.0-10.5	-
S30403	304L	1. 4306	SUS304L	≤0.03	≤2.00	≤0.045	≤0.03	≤0.75	18.0-20.0	8.0-12.0	-
S30908	309S	1.4833	SUS309S	≤0.08	≤2.00	≤0.045	≤0.03	≤0.75	22.0-24.0	12.0-15.0	-
S31008	310S	1.4845	SUS310S	≤0.08	≤2.00	≤0.045	≤0.03	≤1.50	24.0-26.0	19.0-22.0	-
S31600	316	1. 4401	SUS316	≤0.08	≤2.00	≤0.045	≤0.03	≤0.75	16.0-18.0	10.0-14.0	2.0-3.0
S31603	316L	1. 4404	SUS316L	≤0.03	≤2.00	≤0.045	≤0.03	≤0.75	16.0-18.0	10.0-14.0	2.0-3.0
S31703	317L	1.4438	SUS317L	≤0.03	≤2.00	≤0.045	≤0.03	≤0.75	18.0-20.0	11.0-15.0	3.0-4.0
S32100	321	1.4541	SUS321	≤0.08	≤2.00	≤0.045	≤0.03	≤0.75	17.0-19.0	9.0-12.0	-
S34700	347	1.455	SUS347	≤0.08	≤2.00	≤0.045	≤0.03	≤0.75	17.0-19.0	9.0-13.0	-
S40500	405	1.4002	SUS405	≤0.08	≤1.00	≤0.04	≤0.03	≤1.00	11.5-14.5	≤0.60	-
S40900	409	1.4512	SUS409	≤0.08	≤1.00	≤0.045	≤0.03	≤1.00	10.5-11.75	≤0.50	-
S43000	430	1.4016	SUS430	≤0.12	≤1.00	≤0.040	≤0.03	≤0.75	16.0-18.0	≤0.60	-
S43400	434	1.4113	SUS434	≤0.12	≤1.00	≤0.040	≤0.03	≤1.00	16.0-18.0	-	-
S44400	444	1.4521	SUS444L	≤0.025	≤1.00	≤0.045	≤0.03	≤1.00	17.5-19.5	≤1.00	-
S40300	403	-	SUS403	≤0.15	5.5-7.5	≤0.04	≤0.03	≤0.50	11.5-13.0	≤0.60	-
S410000	410	1.40006	SUS410	≤0.15	≤1.00	≤0.035	≤0.03	≤1.00	11.5-13.5	≤0.60	≤1.00
S42000	420	1.4021	SUS420J1	0.16~0.25	≤1.00	≤0.04	≤0.03	≤1.00	12.0-14.0	≤0.75	≤1.00
S440A	440A	1.4028	SUS440A	0.60~0.75	≤1.00	≤0.04	≤0.03	≤1.00	16.0-18.0	-	≤0.75
S32750	SAD2507	1.441		≤0.03	≤1.2	≤0.035	≤0.02	≤0.80	24.0-26.0	6.0-8.0	3.0-5.0
S31803	SAF2205	1.4462		≤0.03	≤2.0	≤0.03	≤0.02	≤1.00	21.0-23.0	4.0-6.5	2.5-3.5
N08904	904L	1.4539		≤0.0.3	≤2.0	≤0.035	≤0.03	≤1.00	18.0-20.0	23.0-25.0	3.0-4.0

Priodweddau Deunydd Dur Di-staen:

Math Rhif.	Cryfder Tynnol, ksi	Yield Nerth, ksi	Elongation mewn 2 fodfedd, %	Lleihau Ardal, %	Caledwch Brinell
301	110	40	60	70	165
302	90	40	55	70	150
303	90	35	50	55	160
304	85	35	55	70	150
304L	80	30	55	70	140
316	85	35	60	70	150
316L	78	30	55	65	145
321	85	35	55	65	150
410	75	40	35	70	155
416	75	40	30	65	155
420	95	50	25	-	241
430F	80	45	25	50	165
15-5	160	145	15	-	330
17-4 (Amod A)	150	110	10	45	332